If you’re looking for the Best Plasma Cutter, there are a few different options to choose from. We’ll discuss the different types available on the market, their pros and cons, and our top pick for the Best Plasma Cutter.
Top 10 Best Plasma Cutter – Best Seller
Best Plasma Cutter Reviews – Our Top Picks
I have already narrowed your options down to only 10 Best Plasma Cutter. Here is a quick comparison chart to help you make a decision.
Review of The 10 Best Best Plasma Cutter
Bestseller No. 1
PRIMEWELD CUT60 60Amp Non-Touch Pilot Arc PT60 Torch Plasma Cutter 110V/220V Dual Voltage 3 Year Warranty
- CUT60 PILOT ARC 3 year warranty 7 day per week support in USA
- PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION
- Blow-back start technology, Pilot Arc
- 60% duty cycle at 60amps, 110/220 with adapter
- Continuous Pilot Arc enables you to cut expanded, rusted, painted metals
Bestseller No. 2
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
- โ ๐๐จ๐ง-๐๐จ๐ฎ๐๐ก ๐๐ข๐ฅ๐จ๐ญ ๐๐ซ๐ ๐๐ฅ๐๐ฌ๐ฆ๐ ๐๐ฎ๐ญ๐ญ๐๐ซ: Efficiently cuts through rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.
- โ ๐๐๐๐ & ๐๐ญ ๐๐จ๐ฐ ๐๐จ๐ฌ๐ญ: Newly Designed Upgraded torch and consumables ensure more precise cutting and durability of consumable life. Lower your usage cost. Compact plasma cutter has a handle for portability and use non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
- โ ๐๐๐ญ๐ฎ๐ฉ ๐ฐ๐ข๐ญ๐ก๐ข๐ง ๐ ๐๐ข๐ง๐ฎ๐ญ๐: The pre-installed NPT 1/4โ industry type D plug and air filter regulator allows you to quickly connect to your air compressor by using the stand coupler existing on your air compressor. The whole machine can be set up quickly within 1 min.
- โ ๐๐ฎ๐ญ๐ฉ๐ฎ๐ญ & ๐๐๐ซ๐๐จ๐ซ๐ฆ๐๐ง๐๐: 10-50A DC output, 1/2โ ideal clean cut and 3/4โ maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
- โ ๐๐ฎ๐ฒ ๐ฐ๐ข๐ญ๐ก ๐๐จ๐ง๐๐ข๐๐๐ง๐๐: We offer a ๐๐ ๐๐๐ฒ ๐ฆ๐จ๐ง๐๐ฒ-๐๐๐๐ค ๐ ๐ฎ๐๐ซ๐๐ง๐ญ๐๐, ๐ ๐-๐ฒ๐๐๐ซ ๐๐๐ฐ ๐๐๐ฉ๐ฅ๐๐๐๐ฆ๐๐ง๐ญ ๐ฐ๐๐ซ๐ซ๐๐ง๐ญ๐ฒ ๐๐ง๐ ๐ญ๐จ๐ญ๐๐ฅ ๐-๐๐๐๐ซ ๐ฅ๐ข๐ฆ๐ข๐ญ๐๐ ๐ฐ๐๐ซ๐ซ๐๐ง๐ญ๐ฒ, please submit warranty registration form on our website. ๐๐ฎ๐ซ ๐๐๐-๐๐๐ฌ๐๐ customer service(via phone/email) is available to assist you.
Bestseller No. 3
Pilot Arc Plasma Cutter, Non-touch, BTC500DP CUT50DP 50Amps Plasma Cutter 110/220V Dual Voltage Plasma Cutting Machine Clean Cut(BTC500DP 110/220)
- ใPilot Arc FunctionใThis plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.
- ใDual-Voltage 110/220VใAutomatic dual-voltage 110/220V. The user only needs to connect the matching power plug to the 110V or 220V power source, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the front panel of the machine will clearly indicate the input voltage.
- ใAir Pressure & Air CompressorใThe regulator and gauge are installed in front of the panel๏ผyou can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.
- ใPost Time FunctionใWith post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.
- ใCutting ThicknessใThe machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; [email protected] 220V 70 PSI.
Bestseller No. 4
Jack&Dave 100 Pcs Plasma Cutting Consumables (Standard) Fit Cut40 50 with Plasma Cutter Torch PT31 LG40
- 100PCS Plasma cutting consumables Common
- Package Include:10 Pcs Cup 30 Pcs Electrodes 20 Pcs Ring 40 Pcs Tip(Common)
- Fits Stahlwerk CT312, CUT50, ACDC TIG200 PLASMA, CT520, CT512P with PT-31 GUN
- Fit PT31-GUN
- For 40 50 Amps Cutting Machine
Bestseller No. 5
Plasma Cutter, CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display
- ใHigh QualityใCut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As Well As The Product Life And Work Efficiency Are Increased By 30% Than Ordinary Machines, Smooth Cutting Surface,Permanent Supply Of High Quality Consumables
- ใPortable Designใ Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle๏ผIt Is Very Convenient To Operate And Carry.Long Term Supply Of Consumables.
- ใDual VoltageใThis Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V-220V), Plug And Play In Different Environments, No External Conversion Plug Required
- ใApplicationใ this is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other Color Metal Materials, Cutting Thickness Is 1-20mm.
Bestseller No. 6
Plasma Cutter, Max Cutting Thickness 20MM, 50A Inverter DC Inverter 110/220V Dual Voltage Cutting Machine with Free Accessories Easy Cutter Welder,Making Our Planet More Productive
- ๐โ Portablet Plasma Cutter Has A Handle For Portability And Uses Non-hazardous Compressed Air To Cut Stainless Steel, Alloy Steel, Mild Steel, Copper,And Torch Efficiently Cuts Though Rough, Painted, And Rusty Surfaces And Produces Minimal Slag; Better Cutting Quality And Longer Consumable Life.
- ๐โ 50 Amp 85%-100% Digital Inverter Air Plasma Cutter,Smart Wide Voltage 90~260V, 50/60Hz(With Converter Power Cord) 20-50A AC- DC Output, 1/2โ Ideal Clean Cut And 3/4โ Maximum Severance Cut Under 220/240V. 20-50A DC Output, 1/3" Ideal Clean Cut And 2/5" Maximum Severance Cut Under 110/120V. Suitable Cutting For Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, Etc. Uses Non-hazardous Compressed Air To Cut, Safe And At Low Cost.
- ๐โ Package Includes:1 x Plasma Cutter (Fixed 220V Power Plug) 1 x 4M S7 Universally Cutting Torch 1 x High-Quality Air Regulator 1 x 240V To 120V Power Plug Adaptor Conversion Cord 1 x Earth Clamp 20PCSx Plasma Cutting Consumables Common 1 x Manual๏ผAir Compressor Start Required๏ผ
- ๐โ Automatic Dual Voltage / Dual Frequency (110/230 V 50/60Hz).Long Term Supply Of Consumables On S7 Shop.
- ๐โ HOLA,Buy With Confidence: We Offer 3-years Warranty, Please Submit Registration Form on Our Website.
Bestseller No. 7
Plasma Cutter 50A, CUT50 110/220V Dual Voltage Plasma Cutting Machine 12mm Clean Cutting Thickness(White)
- ใ50Amps plasma cutterใ: CUT50 is 110/220V auto dual voltage plasma cutting machine, It is inverter technology 50/60Hz high frequency arc starting, 14mm max cutting thickness, quality cutting thickness is 10mm at 220V. The plasma cutting machine is high frequency need to touch metal get arc starting. We suggest pilot arc function. If you like do not touch metal to get arc starting.
- ใDual Voltage 110/220Vใ: The cutting machine is designed dual voltage 110/220V, auto indicate 110 or 220v, handle swift is not required at machine. There are two voltage lights at front of panel, LED 110V lighting when connect machine to 110V, LED 220V will lighting up when connect machine to power 220V, Therefore the user easy read voltages of machine.
- ใCutting Thicknessใ: this plasma cutter easy cut all metals especially stainless steel. Quality cutting thickness for steel is 10mm#65PSI(0.65Mpa) 220V 50Amps, Max cutting thickness 14mm#65PSI 220V 50Amps; At 110V 35Amps, the quality cutting thickness is 8mm#60PSI(0.6Mpa) 110V Max cutting thickness is 10mm#60PSI(0.6Mpa) 110V. The current for this plasma cutting machine 50Amps in 220V, 35Amps in 110V. For cut copper 2-3mm#60PSI(0.6Mps)220V 50Amps is suggested.
- ใQuality accessoriesใ: We only producing high quality machine and supplying quality accessories. 4 meters PT-31 cutting torch coming with machine, earth clamp with 2 meters lead, 2 pcs torch electrodes, 2 pcs tip. 2 meters air hose, 1 set air regulator with air gauge. Machine come with 110V power plug, also with 1 pc wire adaptor from 110V to 220V
Bestseller No. 8
TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V IGBT Inverter Metal Cutting Machine 1/2" Clean Cut
- Non-touch Polit ARC: Can effectively cut rough, painted and rusty surfaces, and generates the least slag. The torch head does not need to touch the metal plate, then it will start arc. Better cutting quality and longer consumable life
- Powerful Cutting Effect: Up to 50A output, 60% Duty Cycle, maximum 1/2" clean cut.
- Multi-applications: Suitable for cutting stainless steel, alloy steel, low carbon steel, copper and other metal materials.
- Safety Protection: Certificated by ETL, built in over current protection, over load protection, temperature control.
- Portable: Auto-voltage adapts to 110 V - 220 V input power with adapter. Lightweight 13lb, can be carry and storage anywhere you need.
Bestseller No. 9
55A Non-Touch Pilot ARC Air Plasma Cutter Dual Voltage 110V/220V Inverter Metal Cutting Machine 1/2" Clean Cut
- NON-TOUCH PILOT ARC - Arc ignition technology allows you to cut without touching the tip to the metal. Efficiently cuts rough, painted and rusted surfaces with minimal drossing. Better cut quality and longer life.Suitable for cutting stainless steel, alloy steel, mild steel, copper and other metal materials.
- DUAL VOLTAGE 110/220V - Automatic Dual Voltage 110/220V. Just connect the power plug to the 110V or 220V power supply, and the machine will automatically identify the voltage. The 110/220V voltage indicator on the panel will clearly indicate the input voltage.
- POWERFUL CUTTING PERFORMANCE - 1/2" Clean Cut Maximum 2/3"(17mm). You can select the current to match the air pressure through the cutting table mentioned in the manual, which is convenient and efficient. The current is displayed as 10-45A under 110V, and 10-55A under 220V
- ENSURE SAFETY: Clear fault display, any problems will be feedback through the display in time, with overcurrent protection, overheating protection, temperature sensor not connected, lack of gas / undervoltage protection.If the plasma cutting machine works for too long, please cool down for about 10 seconds
- PACKAGE INCLUDING - 1X CUT55D plasma cutter, 1X plasma cutting torch, 1X ground clamp, 1X gas hose, 1X air pressure, 1X consumable set. Provide 7*24 hours service, if you have any questions, please contact us in time
Bestseller No. 10
YESWELDER Plasma Cutter Torch Consumables, 24 Pcs Cutting Torch Nozzles Tips Kit For SG-55 AG-60 WSD-60.
- HIGH QUALITYโถ Using high-quality materials, Provides premium strength and durability
- APPLICATION โถThis consumables are suitable for AG-60 AG-60P SG-55 WSD-60 Cutting Torch ,use for CUT60,CUT60SP,CUT50DP ,CUT50PI,LGK-60 ,LTP 5000 etc plasma cutter
- PACKAGE INCLUDEDโถ10 x -Extend Tip+10 x Electrodes+2 x protective cases+2 x isolation blocks
- MATERIALโถ Metal + Porcelain
- OUR PROMISE โถWe strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time.
Things to Consider When Choosing The Best Best Plasma Cutter
When you are ready to buy the Best Plasma Cutter , you will want to consider a few things first. Here is a buying guide to help you make the best decision befor buying the Best Plasma Cutter.
Know Your Needs
Before you even start looking at Best Plasma Cutter , you need to know what you need the product for. What are your goals? What are your specific requirements? Once you know this, you can narrow down your search to products that will actually be helpful to you.
Do Your Research
Once you know what you need, it’s time to start researching the Best Plasma Cutter products. Read online reviews, watch video reviews, and compare prices. This will help you narrow down your choices to a few that are actually worth considering.
Try Before You Buy
Once you’ve found a few products that you think might work for you, it’s time to try them out. If possible, try to find a free trial or a money-back guarantee so that you can test the Best Plasma Cutter before you commit to buying it.
Compare Prices
Again, if you’ve tried out a few products, it’s time to compare prices. This will help you make sure you’re getting the best value for the Best Plasma Cutter.
Read the Reviews
Finally, before you make your final decision, be sure to read the reviews. This will give you an idea of what other people think of the product and whether or not it’s right for you.
Final Verdicts
It is clear that there are a lot of great options to choose from when it comes to the Best Plasma Cutter. However, the best option for each person will vary depending on their individual needs and preferences. The products we have listed above have great features and are highly rated by customers. So, if you are looking for the Best Plasma Cutter, then any of these 10 would be a great choice for you.
